DJI has Introduced a new Three-Channel Follow Focus, LiDAR Transmission Cable Hub, and Expansion Plate for the Ronin 4D.
Three-Channel Follow Focus
The new Three-Channel Follow Focus mounts on the separately available and required High-Bright Remote Monitor using the included Remote Monitor Holder and features a proprietary connector for native control of the Ronin 4D’s Zenmuse X9 lens.
Key features
- Wireless 3-Channel Controller
- For DJI Ronin 4D and Inspire 3
- Adjust Focus, Zoom, Aperture
- Start/Stop Recording Button
- Autofocus, Automated Manual Focus
- Requires High-Bright Remote Monitor
- Monitor Holder, Focus Marking Rings
The integrated focus wheel, slider, rocker, and buttons allow control over focus, aperture, zoom, and start/stop. You can control autofocus and manual focus automation. Three marking rings are also included.
The DJI Three-Channel Follow Focus retails for $909 USD and it should be available soon.
Ronin 4D Expansion Plate
You can expand the connections and functions of your Ronin 4D using the new Expansion Plate. The plate provides multiple connections for added accessories.
It mounts on the back of the Ronin 4D main body using a proprietary connector and three screws, and it features a BNC timecode port, a BNC SDI output, and two XLR inputs. Each XLR line/mic input also supports 48V phantom power for compatibility with a wide range of microphones and audio sources.
KEY FEATURES
- Attaches to the back of Ronin 4D Cameras
- SDI Output, Timecode, Audio Inputs
- 48V Phantom Power
- Proprietary Connector, Mounting Screws
The DJI Ronin 4D Expansion Plate retails for $489 USD.
LiDAR Range Finder (RS) to Transmission Cable Hub
The Range Finder hub is a centralized routing box with four cable extensions that provide interconnection between multiple accessories to keep your camera rig organized.
Key features
- Four 1.3′ Cables
- For LiDAR Range Finder
- Video Transmitter, RS Focus Motor
- Connect Devices to RS 3 Pro
- D-Tap Power Supply Connection
- USB-C Communication Port, DC Output
With four integrated cables, the DJI LiDAR Range Finder to Transmitter Cable Hub facilitates power and control connections with your DJI ecosystem to facilitate stabilization, remote monitoring, and autofocus with your RS 3 Pro gimbal. A dual USB-C connector inserts into your range finder and connects to your video transmitter unit for complete focusing and monitoring of any camera and manual lens combination.
Calibrate your lens and achieve autofocus using the USB-C focus motor connection. Connect the hub to your RS 3 gimbal with a multicamera control cable and the USB-C communication port for a complete control configuration. A D-Tap power cable can even run 12 to 17V of power to the devices via DC output. Included 1/4″-20 and M4 screws secure the hub to your rig. Each cable measures 1.3′ in length for efficient cable runs.
The DJI LiDAR Range Finder to Transmitter Cable Hub retails for $89 USD.
